文章
  • 文章
Search
Home >> news >>common problem >> Puli Instruments tells you the precautions when using double-layer glass reactor
Details

Puli Instruments tells you the precautions when using double-layer glass reactor

  

   Through the development in recent years, the double-layer glass reactor industry has been loved by many customers. The increasing number of laboratories have begun to purchase reactor equipment, which has led to the establishment of many manufacturers and the market competition has become very fierce. .


   Here are some precautions during the use of the double-layer glass reactor:   

   1. First, check the instrument carefully to see if the glass bottle is damaged, and if the interfaces are consistent, please handle it gently.  

  2. Use a soft cloth, preferably pure cotton, to wipe each interface, and then apply a small amount of vacuum grease. (Vacuum grease must be covered after use to avoid dust entering.)


  3. The interfaces of the double-layer glass reactor should not be screwed too tightly. It should be loosened on time to prevent the connector from seizing due to long-term locking.  


   4. Teflon switches everywhere can not be tightened with excessive force, which will damage the glass.  


   5. Turn on the power switch first, and then let the machine work from slow to fast. When stopping, keep the machine in a continuous state, then turn off the switch.  


   6. After each use, it is necessary to wipe off all kinds of oil stains, stains, and solvent remaining on the surface of the machine with a soft cloth. Keep cleaning. 


  7. Loosen the PTFE switches after stopping the machine. Long-term suspension will deform the PTFE piston.  


   8. The controller is getting damp.  

9. Clean the seal ring on time. The method is: remove the seal ring, check whether there is dust on the shaft, wipe it clean with a soft cloth, then apply a small amount of vacuum grease, and install it from the beginning, stick to the shaft and seal ring Smooth.  

   10. It is necessary to purchase the original accessories from the original factory, and the random use of other accessories will cause death hazards to the machine.  

  11. When doing any repair or inspection of the double-layer glass reactor, be sure to block the power and water sources first.

Technical Support: 灯火科技 | Admin Login